Manual oil discharge diesel injection pump test bench 500
Main frequency control.
Test the fuel supply of each cylinder under different speeds.
Check the oil supply time of each cylinder.
Check the performance of mechanical governor.
The test of distributing pump solenoid valve.
Check the performance of pneumatic governor.
Check the performance of the pressure compensator.
Allocate pump return oil measurement.
Check the pump chamber pressure of the distributor pump.
Sealing test of progressive pump
Provide VE internal pressure test.
Provide lubricating oil lubrication function (special order).
With attachments, the performance of the advance device and the vacuum governor can be detected.
Rated output power: 18.5/22/30/37/45 kW motor
Power supply parameters: three phase four wire, 380/220 volt voltage
Main engine speed: 0--4000 RPM / min
IV injector maximum pressure: 2000 Bar
Fuel temperature: 40 + 2 C
Core accuracy: less than 5 m
Fuel tank capacity: 40 liters.
Full size: 228*108*188(CM)
Weight 1000 kg
1.Advanced frequency conversion technology with rotation speed temperature count numeral control.
2.Measuring the Rack Bar journey exactly.
3.Debug speed curve of injecting oil pump.
4.Automatic oil unloading device
5.Print and keep debugging data of pump.
6. Large inertia flywheel--- steady drive and good balance.
Test pump: various traditional mechanical in-line pumps and distributor pumps
Color: Green blue yellow or on request
Q: What is the advantage of your product technology than other manufacturers?
A: We develop the BOSCH compensation (IMA) code generation, Denso compensation code generation and Delphi compensation code generation. This technology in China is unique.
Q: How to get a bigger discount about the test bench?
A: Purchase at least 5 units at one time, can get the big discount from company. To be our dealer can get more.
Q: I want different product style and appearance.
A: No problem，the color of the test bench is request. And the flow calculation method depend on you.
Q: How to install and use the machine after receiving the machine?
A: The test bench has been installed 90%. We have the instructions and technical service personnel to guide.